Article Sidebar
Main Article Content
Abstract
Pepper plant is one of the most widely cultivated plant commodities in Indonesia. Considering the time needed when testing the pepper skin peeling machine including testing the capacity, stripping efficiency and yield of pepper. Testing will be divided into 2 treatments. The first treatment is the pepper treatment with the shell and the second treatment is the pepper without the shell, each treatment will require 5 kg of pepper from 10 kg of pepper. Based on the results of testing the working capacity of the machine with shelled pepper treatment it has an average working capacity of 25 kg/hour and for pepper without shelled it has an average value of 24 kg/hour, the efficiency of peeling pepper is 88% and without shelled 83% , the yield of loose pepper has a yield value of 30% then the yield without shelled has a value of 29%, the first treatment (peel pepper) has a better value than the second treatment
Keywords
Article Details
References
- [1] Yudiyanto, “Tanaman Lada Dalam Perspektif Autekologi” Perpustakaan nasional RI: katalog dalam terbitan(KDT), Jakarta: 2013
- [2] Yulistiati, N., M. Ridawati, dan Alkori, “Sulur Panjat Merupakan Sumber Stek Terbaik untuk Perbanyakan Bibit Lada Secara Vegetatif.” Jurnal Media Pertanian. 1(1); 29-35, 2016
- [3] Sarpian, T, “Pedoman Berkebun Lada dan Analisis Usaha Tani.” Kanisius. Yogyakarta. Hal 98-108, 2003
- [4] Suprapto dan Y. Alvi, “Teknologi budidaya lada.” Bogor: Balitbang Pertanian, 2008
- [5] Watijo, “Uji Beberapa Jenis Zat Pengatur Tumbuh Pada Stek Lada (Piper Nigrum L.) Asal Sulur Panjat dan Sulur Gantung.” Skripsi. STIPER Dharma Wacana Metro Lampung. 48 Hal, 2007
- [6] Nurhakim, Y.I, “Perkebunan Lada cepat tanam”, Jakarta: Infra Hijau, 2014
- [7] Meynarti, S. D. I., N. Yumiati., I. Sulistiyorini, dan Syafaruddin, “Induksi Kalus Embriogenik Lada (Piper nigrum L.) Varietas Petaling 1 Melaluli Embriogenesis Somatik.” Buletin Risek Tanaman Rempah dan Aneka Tanaman Industri 2 (1); 105- 110, 2011
- [8] Risfaheri, T. Hidayat dan M.P Laksmanahardja, “Pengembangan alat Pengupas lada (tipe piringan) dengan system pedal dan analisis ekonominya.” Buletin Penelitian Tanaman Industri. 3 : 47-54, 1992
- [9] R. Bambang Djajasukmana, “Teknik Pembuatan Alat Pengupas Kulit Lada Tipe Piringan”. Buletin Teknik Pertanian Vol.15, No.2, 2010
- [9] Sukirno MS, “Mekanisasi pertanian: pokok bahasan alat mesin pertanian dan pengelolaannya.” Diktat Kuliah UGM. Yogyakarta (ID): Universitas Gadjah Mada. The Plant List. 2018. Piper. Tersedia online http://www.theplantlist.org/1.1/browse-/A/Piper/ Diakses tanggal 19 Mei 2023, 1999
- [10] Siswantoro, B, “Rancang Bangun dan Uji Performasi Alat Pengering Kabinet untuk Produk Berbentuk Tepung.” Laporan Penelitian SPP/DPP Unsoed, Purwokerto, 2014
- [11] Denny R. Jacob J. Marselin J, “Pengunaan Motor Sinkron Tiga Phasa Tipe Salient Pole Sebagai Generator Sinkron.” Politeknik Negri Ambon: Teknik Elektro. Jurnal Simetrik Vol.9,2, 2019
- [12] Suhendra, Dedy L, “Modifikasi dan uji performasi mesin perontok lada dengan mekanisme perontok silinder berjaring.” Jurnal Program Studi Teknik Mesin, Vol.10, 2021
- [13] Suhendra, “Rancang Bangun Dan Pengujian Mesin Pengupas Lada Tipe Silinder Putaran Vertikal”, Tesis, Universitas Gadjah Mada, Yogyakarta, 2010
- [14] Sri Usmiati, ”Pengaruh Lama Perendaman Dan Cara Pengeringan Terhadap Mutu Lada Putih”.Jurnal Teknik Pertanian. Vol. 16, 91-98, 2007.
- [15] R. Bambang Djajasukmana, “Teknik Pembuatan Alat Pengupas Kulit Lada Tipe Piringan”. Buletin Teknik Pertanian Vol.15, No.2, 2010.